MLR55_TPH_SSClick-Lock Pull Down Grab Rail with Toilet Roll Holder in Satin Stainless Steel

Specification

Material #304 Stainless Steel
Tubing 1.2mm #304 Stainless Steel - 32mmØ
Mounting Bracket
& Brace
4.5mm Formed #304 Stainless Steel
Toilet Roll Holder 12.5mmØ Stainless Steel Bar
Finish Satin Stainless Steel
Overall Dimensions  812mmL x 300mmH
Grab Rail 243.6mmH from outer edge to edge
Toilet Roll Holder 168mmL with top of holder 50mm below underside of upper rail
Mounting Bracket 100mmW x 300mmH x 30~50mmD x 4.5mmT
Mounting Holes 6 off by 8.5mmØ
Features Click-lock system to prevent rail sliding down
Unit is Seamless Welded & Polished
Consumable Advice Standard Toilet Roll, can hold up to 230 sheets per roll
Also Available

MLR55_TPH_PSS: Polished Stainless Steel 

MLR55TPH_PEEN: Peened

Note

*Unit stores in upright position

*It is the responsibility of the installer to ensure that the surface/substrate that the unit is installed upon and the fixings used are suitable to withstand the weight bearing loads of the unit and if required as per AS1428 / Australian building code regulations.

*The materials and construction of this grab rail meets AS1428.1 force requirements to be able to withstand a force of 1100Nm applied at any position and in any direction without deformation.

This product is part of a package: Changing Places Design 1 A, B & C (Without Shower) , Changing Places Design 2: With shower rectangular
Drop down rail ss
MLR55_TPH_SS

SSS

Qty

Product successfully added to MetSpec

Downloads & Resources

Stainless Steel Cleaning & Maintenance

Product Enquiry

Please call Metlam or use the product inquiry form if you need more information.

CUSTOMER SERVICE & HEAD OFFICE OPERATIONS

HEAD OFFICE
17 Parkers Road
New Gisborne VIC 3438
 
For Accounts, Customer Service, Sales & General Enquiries:
Opening Hours: 8:30am - 5pm (AEST)
 
 
T: 1300 METLAM
   (1300 638 526)
 
INTERNATIONAL SALES
17 Parkers Road
New Gisborne VIC 3438
 
For Accounts, Customer Service, Sales & General Enquiries:
 
 
T: 1300 METLAM
   (1300 638 526)
NSW (Incorporating ACT)
Sydney Branch
Unit 54, 3 Kelso Crescent
Moorebank NSW 2170
 
For Sales & Customer Service Enquiries:
Opening Hours: 8:30am - 5pm (AEST)
 
 
 
T: 02 8778 8801
 
QUEENSLAND
Brisbane Branch
Shop 2, 57-59 Rosemount Terrace
Windsor QLD 4030
 
For Sales Enquiries:
 
T: 07 3247 0200
VICTORIA (Incorporating TAS)
Melbourne Branch
22 Gallivan Road
New Gisborne VIC 3438
 
For Sales & Customer Service Enquiries:

 

T: 03 5420 8800
WESTERN AUSTRALIA (Incorporating NT & SA)
Perth Branch
Unit 1, 5 Bramall Street
East Perth WA 6004
 
For Sales & Customer Service Enquiries:
Opening Hours: 8:30am - 5pm (AWST)
 
 
 
T: 08 6250 2601
NEW ZEALAND
Head Office
17 Parkers Road
New Gisborne VIC 3438
 
For Sales & Customer Service Enquiries:
 
 
 
 
T: 0407 863 730

Your product has been added to MetSpec. The selected product is also part of an overall package.


You may add any of these products to complete the package. Ensure when making selections from the products below that you only select the products specific to your project requirement and not all. Customisations will consider the following where appropriate:
- Left or Right Hand
- Male or Female
- Hand Dryer or Paper Towel Dispenser
- Single, Double or Jumbo Toilet Roll Holder  



Changing Places Design 1 A, B & C (Without Shower)

Changing Places Design 2: With shower rectangular

Technical Specification


MLR55_TPH_SSClick-Lock Pull Down Grab Rail with Toilet Roll Holder in Satin Stainless Steel

Specification

Material #304 Stainless Steel
Tubing 1.2mm #304 Stainless Steel - 32mmØ
Mounting Bracket
& Brace
4.5mm Formed #304 Stainless Steel
Toilet Roll Holder 12.5mmØ Stainless Steel Bar
Finish Satin Stainless Steel
Overall Dimensions  812mmL x 300mmH
Grab Rail 243.6mmH from outer edge to edge
Toilet Roll Holder 168mmL with top of holder 50mm below underside of upper rail
Mounting Bracket 100mmW x 300mmH x 30~50mmD x 4.5mmT
Mounting Holes 6 off by 8.5mmØ
Features Click-lock system to prevent rail sliding down
Unit is Seamless Welded & Polished
Consumable Advice Standard Toilet Roll, can hold up to 230 sheets per roll
Also Available

MLR55_TPH_PSS: Polished Stainless Steel 

MLR55TPH_PEEN: Peened

Note

*Unit stores in upright position

*It is the responsibility of the installer to ensure that the surface/substrate that the unit is installed upon and the fixings used are suitable to withstand the weight bearing loads of the unit and if required as per AS1428 / Australian building code regulations.

*The materials and construction of this grab rail meets AS1428.1 force requirements to be able to withstand a force of 1100Nm applied at any position and in any direction without deformation.

This product is part of a package: Changing Places Design 1 A, B & C (Without Shower)

Downloads & Resources



The photographs and line drawings of the products presented above are representational only.
Metlam Australia Pty Ltd reserves the right to, and from time to time, make changes and improvements in design and dimensions.

 

Subscribe for Updates & News

Proudly Australian and celebrating over 20 years in the market