ML_ECLIPSE01_WHTEclipse Slimline Automatic Operation Hand Dryer in White

Specification

Material 1.2mm #304 Satin Stainless Steel
Finish White Powder Coat Steel
Motor 500W, 16,000-29,000 r.p.m, adjustable brush type, dual ball bearings
Features Touch-free Patented high-flow dual air outlets
Warranty 5-Year Warranty (3 Years Parts and Labour+ 2 Years Parts only)
Power Use 220-240 Volts, 50Hz
Dimensions 220mmW x 287.9mmH x 100mmD
Operating Sound Level 72db (+-3)@1M db
Motor Speed (Max Settings) 29,000 RPM
Motor Speed (Min Settings) 16,000 RPM
Motor Speed Notes 250-500W Brush Type, Dual Ball Bearings, 95° auto reset overload
Air Speed (Max Settings) 115m/s ==257MPH
Air Speed (Min Settings) 95m/s ==212MPH
Heater Element Power 325-500 Watts, adjustable
Motor Cut-Off Time 60-second power cut off, auto reset
Rated Power (Max Settings) 1000 Watts
Rated Power (Min Settings) 575 Watts
Rated Power Notes Motor 250-500W, Heating Element 325-500W
Energy Per Day (Min Setting) 2.4 Watt-hours (Wh)
Energy Per Day (Max Setting) 4.17 Watt-hours (Wh)
Sensor Type Infrared Automatic - 152mm +/- 20mm present blue LED indicates operation/range
Drying Time Less than 15 seconds
Carbon Dioxide Emission 305g Only
IP Rating IP24
DP Rating IPX 1
Heater Element 325-500W
Heater Auto resetting thermostat turns unit off at 85°C
Warm Air Speed: 95m/s - 115m/s (Adjustable). Temp: Ambient +30°
Protection 60-sec power cut off, auto reset
Timing 2 sec delay turn off after the last read
Case Security 2 SS theft-resistant hex drive screws (hex key supplied)
Net Weight 4.2kg
Also Available ML_ECLIPSE_DESIGNER: Designer Black
  ML_ECLIPSE05_SS: Stainless Steel
  For Metlam Australia's extensive Hand Dryer Range Click on the link here
Note

* The unit can be hard-wired by an electrician or used with the cord and plug provided

* This unit is accessible compliant when installed in accordance with AS1428.1. guidelines.

* Hardwire - 80mm from the connection point to the wall. 

* Cord and plug - 80mm from the connection point to the bottom of the unit. 

For installation instructions download the Metlam Australia App

Safety Approvals - Click here to download more information

Green Certificates

 

 

This product is part of a package: Complete Accessible Bathroom Package , Changing Places Design 1 A, B & C (Without Shower)
  • This unit is accessible compliant when installed in accordance with AS1428.1. guidelines.
ML_ECLIPSE01_WHT
ML_ECLIPSE01_WHT Drawing

PCW

Qty

Product successfully added to MetSpec

Downloads & Resources

Stainless Steel Cleaning & Maintenance
Discover the Difference
Trouble shooting your Metlam Australia Hand Dryer
How to install a Metlam Australia Eclipse Hand Dryer

Product Enquiry

Please call Metlam or use the product inquiry form if you need more information.

CUSTOMER SERVICE & HEAD OFFICE OPERATIONS

HEAD OFFICE
17 Parkers Road
New Gisborne VIC 3438
 
For Accounts, Customer Service, Sales & General Enquiries:
Opening Hours: 8:30am - 5pm (AEST)
 
 
T: 1300 METLAM
   (1300 638 526)
 
INTERNATIONAL SALES
17 Parkers Road
New Gisborne VIC 3438
 
For Accounts, Customer Service, Sales & General Enquiries:
 
 
T: 1300 METLAM
   (1300 638 526)
NSW (Incorporating ACT)
Sydney Branch
Unit 54, 3 Kelso Crescent
Moorebank NSW 2170
 
For Sales & Customer Service Enquiries:
Opening Hours: 8:30am - 5pm (AEST)
 
 
 
T: 02 8778 8801
 
QUEENSLAND
Brisbane Branch
Shop 2, 57-59 Rosemount Terrace
Windsor QLD 4030
 
For Sales Enquiries:
 
T: 07 3247 0200
VICTORIA (Incorporating TAS)
Melbourne Branch
22 Gallivan Road
New Gisborne VIC 3438
 
For Sales & Customer Service Enquiries:

 

T: 03 5420 8800
WESTERN AUSTRALIA (Incorporating NT & SA)
Perth Branch
Unit 1, 5 Bramall Street
East Perth WA 6004
 
For Sales & Customer Service Enquiries:
Opening Hours: 8:30am - 5pm (AWST)
 
 
 
T: 08 6250 2601
NEW ZEALAND
Head Office
17 Parkers Road
New Gisborne VIC 3438
 
For Sales & Customer Service Enquiries:
 
 
 
 
T: 0407 863 730

Your product has been added to MetSpec. The selected product is also part of an overall package.


You may add any of these products to complete the package. Ensure when making selections from the products below that you only select the products specific to your project requirement and not all. Customisations will consider the following where appropriate:
- Left or Right Hand
- Male or Female
- Hand Dryer or Paper Towel Dispenser
- Single, Double or Jumbo Toilet Roll Holder  



Complete Accessible Bathroom Package

Changing Places Design 1 A, B & C (Without Shower)

Technical Specification


ML_ECLIPSE01_WHTEclipse Slimline Automatic Operation Hand Dryer in White

Specification

Material 1.2mm #304 Satin Stainless Steel
Finish White Powder Coat Steel
Motor 500W, 16,000-29,000 r.p.m, adjustable brush type, dual ball bearings
Features Touch-free Patented high-flow dual air outlets
Warranty 5-Year Warranty (3 Years Parts and Labour+ 2 Years Parts only)
Power Use 220-240 Volts, 50Hz
Dimensions 220mmW x 287.9mmH x 100mmD
Operating Sound Level 72db (+-3)@1M db
Motor Speed (Max Settings) 29,000 RPM
Motor Speed (Min Settings) 16,000 RPM
Motor Speed Notes 250-500W Brush Type, Dual Ball Bearings, 95° auto reset overload
Air Speed (Max Settings) 115m/s ==257MPH
Air Speed (Min Settings) 95m/s ==212MPH
Heater Element Power 325-500 Watts, adjustable
Motor Cut-Off Time 60-second power cut off, auto reset
Rated Power (Max Settings) 1000 Watts
Rated Power (Min Settings) 575 Watts
Rated Power Notes Motor 250-500W, Heating Element 325-500W
Energy Per Day (Min Setting) 2.4 Watt-hours (Wh)
Energy Per Day (Max Setting) 4.17 Watt-hours (Wh)
Sensor Type Infrared Automatic - 152mm +/- 20mm present blue LED indicates operation/range
Drying Time Less than 15 seconds
Carbon Dioxide Emission 305g Only
IP Rating IP24
DP Rating IPX 1
Heater Element 325-500W
Heater Auto resetting thermostat turns unit off at 85°C
Warm Air Speed: 95m/s - 115m/s (Adjustable). Temp: Ambient +30°
Protection 60-sec power cut off, auto reset
Timing 2 sec delay turn off after the last read
Case Security 2 SS theft-resistant hex drive screws (hex key supplied)
Net Weight 4.2kg
Also Available ML_ECLIPSE_DESIGNER: Designer Black
  ML_ECLIPSE05_SS: Stainless Steel
  For Metlam Australia's extensive Hand Dryer Range Click on the link here
Note

* The unit can be hard-wired by an electrician or used with the cord and plug provided

* This unit is accessible compliant when installed in accordance with AS1428.1. guidelines.

* Hardwire - 80mm from the connection point to the wall. 

* Cord and plug - 80mm from the connection point to the bottom of the unit. 

For installation instructions download the Metlam Australia App

Safety Approvals - Click here to download more information

Green Certificates

 

 

This product is part of a package: Complete Accessible Bathroom Package

Downloads & Resources



The photographs and line drawings of the products presented above are representational only.
Metlam Australia Pty Ltd reserves the right to, and from time to time, make changes and improvements in design and dimensions.

 

Subscribe for Updates & News

Proudly Australian and celebrating over 20 years in the market